#RINNAI ENERGYSAVER 1001F RED LIGHT SERIAL#
#RINNAI ENERGYSAVER 1001F RED LIGHT MANUAL#
#RINNAI ENERGYSAVER 1001F RED LIGHT PC#

#RINNAI ENERGYSAVER 1001F RED LIGHT MANUAL#

Once the Set back function is selected the appliance will start heating whenever the room temperature falls below the selected temperature, regardless of timer or manual settings. This temperature should be set below the room temperature setting. Set back This function allows a minimum room temperature to be pre-set, between 38вњЇ and 78вњЇ (in 2вњЇ increments). If the heater is OFF, pressing the вЂњOverrideвЂќ button will turn the heater ON, and allow you to select a temperature setting, until the next period. For example, if the heater is ON, pressing the вЂњOverrideвЂќ button will turn the heater OFF until the next period. It allows you to вЂњoverrideвЂќ the reset timer setting until the beginning of the next Timer period. Override Function This function is used only when the heater is in Timer operation. The left side of the display shows the temperature setting. Press the up or down arrows to set the temperature. Turn the heater on by pressing the вЂњON/OFFвЂќ button. Press the вЂњSet TimesвЂќ button until none of the time options are lit up. Holding down either of the arrow keys will change the time more quickly. Press the up and down arrows to set the time. Occasionally, the room temperature may briefly exceed the temperature setting due to the layout of the room or heating area.

Based on the information collected by the room temperature thermistor when the heating starts, the heating capacity is automatically adjusted to achieve a comfortable heating effect and to reach the temperature setting quickly.

#RINNAI ENERGYSAVER 1001F RED LIGHT SERIAL#

Operating Instructions Getting to Know your New Heating Appliance CONTROL PANEL WARM AIR OUTLET HUMIDIFIER RATING PLATE REMOVE BOTTOM COVER AND PULL OUT TO REFILL MODEL NUMBER, SERIAL NUMBER, GAS TYPE, ETC.Д¬ontrol Panel Sensible Temperature Control The sensible temperature control feature allows comfortable heating which matches the conditions in the room. Maximum supply gas pressure 10.5 in (267 mm) W.C.

Spark Detector: The appliance automatically shuts down if there is an abnormal spark at ignition.ДЄppliance Specifications EX08C EX11C Natural Gas Propane Gas Natural Gas Propane Gas Minimum supply gas pressure 4.5 in (114 mm) W.C.

Flame Failure: The appliance will automatically shut down if the burner flame is extinguished.

If the fuse blows then all indicator lamps will be off.

#RINNAI ENERGYSAVER 1001F RED LIGHT PC#

Power Surge Fuse: A glass fuse on the PC board protects against overcurrent.Overheat: The appliance will automatically shut down when the appliance exceeds a predetermined temperature.WARNING Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. DANGER Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. This symbol alerts you to potential hazards that can kill or hurt you and others. This appliance may be installed in an aftermarket, permanently located, manufactured home (USA only) or mobile home, where not prohibited by local codes.Д¬onsumer Safety Information Safety Definitions This is the safety alert symbol. This appliance may be installed as an OEM installation in a manufactured home (USA only) or mobile home and must be installed in accordance with the manufacturerвЂ™s instructions and the Manufactured Home construction and Safety Standard, Title 24 CFR, Part 3280, in the United States, or the Mobile Home Standard, CAN/CSA Z240 MH Series, in Canada. OwnerвЂ™s Operation and Installation Manual for the EX08C (RHFE-202FTA) EX11C (RHFE-265FTA) EnergysaverВ® Gas Direct Vent Wall Furnace Table of Contents.

Rinnai energysaver 1001f red light